(1) The seat of the base is firstly leveled with a horn. The deviation of the unevenness in each direction shall not be greater than 0.1mm per meter. After the leveling of the base, the first grouting shall be performed. It must be thoroughly dried to permit installation and adjustment of the machine. , Tighten the anchor bolts.
(2) When installing and disassembling, lifting work rolls and precision-machined parts, it is not allowed to directly contact the processing surface with a steel rope, and the felt should be covered to prevent scratches.
(3) The seals on the contact surfaces and on the bolts should be coated with a thin layer of grease during installation.
(4) Tighten all fastening bolts and anchor bolts evenly.
Related Searches: Dongguan Slitters Guangdong Slitters Shenzhen Laminators Huizhou Slicing Machines Dongguan Rewinding Machines Dongguan Spinning Machines Manufacturers Guangzhou Cutting Machines