Induction Slitter Common Problems and Solutions
When the slitting machine is an important equipment in the paper product processing industry, the paper product manufacturer uses this equipment almost every day. If a failure occurs, it will hinder the production process and the manufacturer will also suffer losses. In general, if ordinary workers do not pay attention to daily maintenance, the cutting machine will often have some thorny problems. In order to resolve these small problems that occur from time to time, we have summarized the following frequently encountered problems. For your reference, I hope to help everyone:
First, the paper slitting machine was uneven. This situation is mostly due to the fact that the paper core is not suitable, as long as the paper core that meets the required inner diameter is replaced, and the winding press roller is used during the winding process, which can also avoid the uneven winding of the slitter.
Second, slitting the winding material has started. This is mainly due to the wrong winding tension. Adjust the proper winding tension of the paper slitting machine. Use the pressure roller to wind the slitting material and over the press roller before entering the winding core.
Third, meter counts are not allowed. This kind of problem can use the rice wheel double wheel to contact the feeding roller at the same time, and make a mark on the meter wheel for 5 cycles to count 1 meter or else to replace the meter.
These points are often encountered by the staff when operating the slitting machine. In order to quickly resolve these points, we must keep in mind these points. There may be other new problems. Whether it is a rewinder or a napkin machine, you can consult these. Paper machinery manufacturers, so that professional technical staff to help solve.